8100 – Aluminum Full View Doors – 1/8″ Glass Glazing

Glass Door 2″ – 1/8″ Glass Aluminum Door

Clear
SKU: N/A Category:

Description

Door Sections

Door sections are 2″ thick and consist of extruded aluminum rails and stiles assembled with 5/16″ threaded rods and nuts. Glazing is sealed on all four sides and retained on all four sides with extruded aluminum snap-in beads. The end stiles have a visible width of 3 3/8″. Center stiles have a visible width of 2 3/4″. Top rail has a visible height of 2 7/8″ or 4 1/4″ depending on door size. Bottom rail has a visible height of 2 7/8″, 4 1/4″ or 7 1/4″ depending on door size and weight. Combined meeting rails have a visible height of 2 1/2″. Lower meeting rail has an integral reinforcing fin on doors over 12′ 2″ wide.

Glazing

Sections can be glazed with 1/8″ glass or acrylic. Many glazing options are available including tempered glass, tinted glass, low E glass, or laminated safety glass. 0.062″ anodized aluminum panels can be used in any section.

Track

Galvanized track system is 2″ or 3″ depending on door size and weight and can be bracket or angle mounted as required. Optional track configurations include high lift, vertical lift, low headroom, and follow the roof pitch.

Hardware

Hinges and brackets are made from galvanized steel. Rollers have (10) 1/4″ steel ball bearings in case hardened races.

Spring Counterbalance

Springs are oil tempered helical wound and stress relieved torsion springs mounted on a cross header shaft supported by bearing brackets. Springs are calculated for 10,000 door cycles. 25K, 50K, or 100K cycles are optional. Cables are galvanized aircraft quality with a minimum 7 to 1 safety factor.

Finish

All aluminum parts are clear anodized, bronze powdercoated or white powder coated. Powder coated in custom colors available.

Weatherstrip

Bottom rail has a replaceable U type bottom astragal. Optional weather-stripping is available for header and jambs.

Lock

Lock is interior mounted slide lock.

Operation

Operation to be manual push up, chain hoist, or electric motor.

Wind Load

Consult factory for available wind load rated options.

Construction

8000

Sizes Available

 Door Width Panels Wide    
 Up to 9’2″  panel panel
9’3″ to 12’2″  panel panel panel
 12’3″ to 17’2″  panel panel panel panel
 17’3″ to 18’2″  panel panel panel panel panel
 18’3″ to 20’2″  panel panel panel panel panel panel

 Section Heights: 21″ 24″

Additional Information